|
CONSTRUCTION:
Disconnecting switches type ONIIIS have secant construction. The base is a steel frame which,
together with the shaft and angle of turn limiters, forms a non-dismountable sub-assembly. The lever could be turn every 10o within the
limits of full turn. Bracketing isolators are fastened to the frame, and are the mounting for the current circuit. Among constant and
moving contacts there is a linear contact and the proper pressure is assured by the spring. The moving contacts are jointed with drive shaft
by porcelain isolating string.
The construction of disconnectors type ONIIIS allows for the addition of earthing switches. Earthing switches may be located on the side of
the permanent inseparable contact (lower earthing switches) or on the side of the permanent separable contact (upper earthing switches).
Between the disconnector shaft and the earthing switch shaft, there is a mechanical interlocking ensuring the proper order of switching.
The disconnectors, equipped with manual or electric operating mechanism, may operate in horizontal or vertical position. The clamps are
adapted for fastening flat busbar in parallel to the frame.
The disconnectors may be operate by the following plane operating mechanisms: manual, type NNP and electric, type NSL60 or by intersecting
axis gear with rotary operating mechanisms: manual, type NR-5 and electric, type NSO30. The drive is engaged with the disconnecting switch
by adjustable tubular string.
CHARACTERISTIC FEATURES:
good technical parameters
quick assembling and easy to adjustment
good anticorrosive cover (hot-dip zinc coating or stainless steel)
plane motion NNP or rotary motion power transmission NSL60 use possibilities
high durability and reliability
base montage holes compatible with ONIII 20...-2 and ONIII 30...-2 standard
capability of work in vertical or horizontal position
earthing switches equipped with mechanical interlocking
<<BACK
|